Metrohm viva 1.0 Manual - Manual (Page 721)

￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭￭
6 Configuration
viva 1.0
￭￭￭￭￭￭￭￭ 709
6.9.3.4 History - Limit values
Tab: Configuration ▶ Common Variables ▶ [Edit] ▶ Properties... ▶ Common varia-
ble - 'Name' ▶ History ▶ [Limit values] ▶ Limit values common variable - 'Name'
In the Limits for common variable dialog window both warning and
intervention limits can be defined for the value of the common variables.
If you have defined the limits, then these will be shown in the graph in
orange for warning limits and red for intervention limits. However,
whether these limits are observed is not monitored, i.e., a breach of these
limits does not trigger any action.
Warning limits for Common Variable
on | off (Default value: off)
If this check box is activated, then the values of the common variables will
be shown in orange if these limits are breached.
Lower limit
Lower warning limit for common variable.
Input range -1.0E+99 - 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for common variable.
Input range -1.0E+99 - 1.0E+99 (max. 10 digits)
Intervention limits for Common Variable
on | off (Default value: off)
If this check box is activated, then the values of the common variables will
be shown in red if these limits are breached.
Lower limit
Lower warning limit for common variable.
Input range -1.0E+99 - 1.0E+99 (max. 10 digits)
Upper limit
Upper warning limit for common variable.
Input range -1.0E+99 - 1.0E+99 (max. 10 digits)