Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 244)

244 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 8 PowerFlex 700AFE Drive - Frame 13 Procedures
Removing the LCL Filter Protective Cover
1. Review the General Precautions on page 17 .
2. Remove power from the AFE. See Remove Power from the AFE on page
192 .
3. Remove the four T25 Torx self-tapping screws that secure the front
bracket shown in
Figure 32 . This bracket holds the LCL filter in the
cabinet.
4. Remove the vented cover from the bottom of the LCL filter to access the
DC fan fuses, fan, and DC power supply.
Figure 32 - Removing LCL Filter Protective Covers
5. Install the protective covers in the reverse order of removal.
Front Bracket
Front View - IP21 NEMA / UL Type 1 (Rittal) Cabinet Shown
Shown with
cabinet doors
removed
• LCL Filter DC Fan Fuses
• LCL Filter Fan
• DC Power Supply
(all behind vented cover)