Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 162)

162 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 5 PowerFlex 700H and 700S Drives - Frame 13 Procedures
Converter Units
1. Review the General Precautions on page 17 .
2. Remove power from the drive. See Remove Power from the Drive on page
134 .
3. Move the control frame, and remove the screens, airflow plates, and
protective covers. See Move the Control Frame, and Remove the Screens,
Airflow Plates, and Protective Covers on page
135 .
4. Remove the main fan assemblies. See Remove the Main Fan Assembly on
page
143 .
5. Disconnect the converter X1 wire harness (#1) from the connector and
fan extension wire (#2) on the sheetmetal cover.
5
Series B converter shown