Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 186)

186 Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 7 PowerFlex 700AFE Drive - Frame 10 Procedures
Frame 10 AFE Drive
Configurations The frame 10 AFE drive consists mainly of a LCL filter section and a converter
section. The converter section is actually an inverter section designed to either
supply DC bus voltage or regenerate power back to the AC line. For clarity of
instructions, the converter will be referred to as a power structure throughout this
chapter.
Figure 20 - Frame 10 AFE System
The PowerFlex 700AFE is available in several configurations:
• The IP00 NEMA / UL Type Open drive is an open style frame that is
available through the Rockwell Automation Systems and Solutions
Business. This configuration is repackaged into a cabinet structure that is
consistent with the system.
• The IP20 NEMA / UL Type 1 (MCC) enclosure (finger safe and dripping
water protection).
• The IP21 NEMA / UL Type 1 (Rittal) enclosure (finger safe and no water
protection).
The spare parts listed in this manual fit any of the cabinet types listed above. The
procedures contained in this document pertain to each drive configuration listed
above. Only the enclosure and method to get to the components may vary
slightly. For IP20 and IP21 enclosures access procedures, see the PowerFlex
700AFE Frame 10 Hardware Service Manual, publication
20Y-TG001 .
LCL Filter Fan and
DC Power Supply
(Behind Cover)
Inverter Power
Module
IP21 NEMA / UL Type 1 (Rittal) Cabinet IP20 NEMA / UL Type 1 (MCC) Cabinet
LCL Filter Fan and
DC Power Supply
Inverter Fan
Fuses
(Behind Cover)
LCL Filter DC
Fan Fuses
(Located on
Sidewall)
LCL Filter DC
Fan Fuses
(Located on
Sidewall)