Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 157)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 157
PowerFlex 700H and 700S Drives - Frame 13 Procedures Chapter 5
Inverter Units
1. Review the General Precautions on page 17 .
2. Remove power from the drive. See Remove Power from the Drive on page
134 .
3. Move the control frame, and remove the screens, airflow plates, and
protective covers. See Move the Control Frame, and Remove the Screens,
Airflow Plates, and Protective Covers on page
135 .
4. Remove the main fan assemblies. See Remove the Main Fan Assembly on
page
143 .
5. Remove the AC fan inverter assemblies. See Removing the Main AC or
DC Fan Power Supply Assemblies (Inverter Only) on page
145 .
6. For AC input standalone drives only, remove the wire harness that
connects the fans on the converter and inverter units.
Note: DC input drives do not have an converter section, so there is no
converter to inverter interconnect wire harness.
6
Converter Section Inverter Section