Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 User Manual
Page 156
156
Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
Chapter 5
PowerFlex 700H and 700S Drives - Frame 13 Procedures
Frame 13 drives can be configured for AC or DC input. A frame 13 AC input
drive has both converter and inverter assemblies, while a frame 13 DC input, or
common bus, drive has only an inverter assembly. Therefore, the procedures for
installing the retrofit kits are detailed in these sections:
•
Inverter Units on page
•
•
Fan Wire Harness Installation on page
Follow these steps to remove and replace an existing AC fan system with a new
DC fan system.
SK-H1-DCFANRETROFIT-F14B - For AC input frame 14 drives w/4
NFEs
1
DC fan assembly
10
2
DC fan power supply assembly 1
6
3
DC fan power supply assembly 2
4
4
DC fan power supply wire harness 1
4
5
DC fan power supply wire harness 2
4
6
DC chaining wire harness
2
7
M4 x 8 mm POZIDRIV screws
8
8
M5 x 10 mm hexagonal socket screws
64
9
Wire ties
42
10
Wire tie mounting clamps
4
12
Wire harness for 2 NFE
2
SK-H1-DCFANRETROFIT-CONV - For frame 14 drive converter
extension
1
DC fan assembly
1
2
DC fan power supply assembly
1
3
DC fan power supply wire harness 1
1
4
M4 x 8 mm POZIDRIV screws
2
5
M5 x 10 mm hexagonal socket screws
4
6
Wire ties
6
7
Wire tie mounting clamp
1
9
DC fan power supply wire harness 2
1
Table 3 - Available AC to DC Main Fan Inverter Systems Retrofit Kits (Continued)
Cat. No.
Item
Description
Qty
Kit Contents