Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 - Manual (Page 209)

Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014 209
PowerFlex 700AFE Drive - Frame 10 Procedures Chapter 7
9. Secure the new fan capacitor to the bracket using the M12 hexagonal nut
and lock washer provided.
10. If necessary, secure the fan capacitor bracket (and capacitor) to the drive
chassis using the M8 x 12 mm hexagonal socket screw and spring washer
provided. Tightening torque is 20 N
• m (178 lb • in).
Note: Secure the capacitor in a position that allows the maximum amount
of clearance possible between the transformer and capacitor, ensuring that
they DO NOT touch.
11. Connect the new fan capacitor wires to the connectors marked “Brown”
and “Blue.”
12. Secure the fan capacitor wires to the fan wire bundle using cable ties.
IMPORTANT Verify that no wires are touching the sheet metal on the
drive chassis.
12 mm
5.0 N
• m (44.2 lb • in)