Tools needed for frame 13 fan system repairs, Frame 13 afe schematic diagrams – Rockwell Automation 20Y PowerFlex 700H, 700S, and 700AFE Drive Fan Systems, Frames 9...14 User Manual
Page 125
Rockwell Automation Publication PFLEX-IN029B-EN-P - August 2014
125
PowerFlex 700H and 700S Drives - Frame 13 Procedures
Chapter 5
Tools Needed for Frame 13
Fan System Repairs
•
#2 POZIDRIV screwdriver
•
19 mm socket wrench
•
5.5 mm hex key or HOP6 bit
•
T20 and T25 hexalobular screwdriver
•
Multi meter
•
Fuse puller
•
Needle-nose pliers
•
Wire cutter
•
Cable ties
•
Optional: PowerFlex 700H and 700S maintenance stand (cat. No. 20-
MAINSTND)
Frame 13 AFE Schematic
Diagrams
The PowerFlex 700H and PowerFlex 700S frame 13 drive can be configured with
either AC or DC (common bus) input voltage applied. The AC input drives have
both converter and inverter sections, while the DC input drives have only an
inverter. The schematics will change based on this hardware configuration.
provides a list of schematic diagrams applicable to each drive
configuration.
Table 2 - Drive Configurations and Applicable Schematics
Drive Input Voltage
Drive Hardware Section
AC Fan Systems
DC Fan Systems
AC
System
on page
Converter
on page
on page
Inverter
on page
on page
DC
System
on page
Converter
n/a
n/a
Inverter
on page
on page