SkyTrak 8042 Service Manual User Manual
Page 852

10.11
Model 8042, 10042, 10054 Legacy
Rev. 10/03
Stabil-TRAK™ System and Boom Interlock System
4. The fuse block relays (3 through 10) are located in
the fuse block and is mounted behind the right side
console access panel (15). To gain access, remove
the screws (16) that secure the right side panel in
place.
5. Remove the suspect relay from the fuse panel.
6. Apply the proper voltage to the relay coil at
terminal 86 (17 and 19) and attach the ground (-)
probe to terminal 85 (18 and 20), ground. An audible
click should be heard indicating that the relay is
functioning properly.
7. When reassembling the right side console access
panel (15), torque the screws (16) to 3 - 5 lb-ft
(13 - 22 Nm).
8. If the vehicle has one battery, connect the
negative (-) battery cable to the negative (-) battery
terminal (13).
If the vehicle has dual batteries, connect both
negative battery cables to both negative (-) battery
terminals (14).
OH2430
15
16
87A
87
86
85
30
MT3140
86
85
30
87
87A
MN1820
17
18
19
20