SkyTrak 8042 Service Manual - Manual (Page 268)

4.29 Model 8042, 10042, 10054 Legacy Rev. 10/03
Cab and Covers
12. Vehicles equipped with auxiliary hydraulic only:
Remove the auxiliary hydraulic joystick assembly.
(Refer to Section 4.3.7, a. “Auxiliary Hydraulic
Joystick Removal.”)
13. Working under the cab, label and disconnect the
hydraulic hoses (20 thru 27) at the cab fittings. Plug
the hoses and cap the fittings.
14. Remove six hex nuts, six lockwashers and six flat
washers (28) securing the upper (29) and lower (30)
transmission covers to the frame. Remove the
covers.
15. Unlock and open the right engine access door.
WARNING:
Hydraulic fluid leaking under
pressure can penetrate the skin, cause
infection, gangrene, and death or serious
personal injury. If injured, see a doctor
immediately.
Relieve all pressure before disconnecting any
component, part, line or hose. Slowly loosen
parts and allow release of residual pressure
before removing any parts or component.
WARNING:
Wait for the hydraulic fluid
to cool before servicing any hydraulic component.
Hot hydraulic oil can cause severe burns.
MA8520
13
14
15
16
17
18
19
MA8500
20
21
22 23
24
25
26 27
MA8620
~
~
28
29
30
28