SkyTrak 8042 Service Manual - Manual (Page 317)

Transmission: ZF 4 WG-98 TC
6.12 Model 8042, 10042, 10054 Legacy Rev. 10/03
Note: The lifting ring must be repositioned, to allow the
covers to be installed.
7. Remove the two capscrews (1) securing the lifting
ring (2) to the transmission housing. Save the
capscrews for later use.
8. Remove the capscrew (3), and secure the lifting ring
(2) in the storage position (4) on the transmission
housing as shown.
9. Connect the transmission temperature switch
connector (5) and shift solenoid wiring harness
connectors (6 and 7).
10. Attach the black wire (8) to the transmission housing
with a capscrew (9) removed in Step 7.
11. Secure the wiring harness to the transmission
housing using the clip (10) and capscrew (11)
removed in Step 7.
12. Connect the transmission oil cooler inlet (12) and
outlet (13) hoses at the transmission.
MH3410 1
2
3
4
MH3390
5
6
7
8
9
10
11
MA8990
12
13
8042 S/N 13198 thru 18990
10042 S/N 13198 thru 19030
10054 S/N 13198 thru 19079
8042 S/N 18991 & After
10042 S/N 19031 & After
10054 S/N 19080 & After
MH4500
13
12