8 fluid and lubricant capacities, Fluid and lubricant capacities – SkyTrak 8042 Service Manual User Manual
Page 49

General Information and Specifications
2.24
Model 8042, 10042, 10054 Legacy
Rev. 10/03
2.5.8
Fluid and Lubricant Capacities
Engine Crankcase Oil:
Capacity with Filter Change
11.0 qt (10,4 liters) Cummins 4BT3.9 & 4BTA3.9 Engine
10.5 qt (10 liters) Cummins QSB4.5T Engine
Filter Capacity
1.0 qt (0,9 liters) Cummins 4BT3.9 & 4BTA3.9 Engine
0.85 qt (0,80 liters) Cummins QSB4.5T Engine
Oil Type
SAE 15W40 Diesel Engine Oil
(Refer to Section 2.6.6, “Engine.”)
Fuel Tank:
Total Capacity
37.0 gal (140 liters)
Usable Capacity
35.6 gal (135 liters)
Type of Fuel Above 32° F (0° C)
Standard #2 Diesel (Refer to Section 2.6.6, “Engine.”)
Type of Fuel Below 32° F (0° C)
50/50 Mix of #1 and #2 Diesel Fuels
(Refer to Section 2.6.6, “Engine.”)
Cooling System:
Capacity w/o Heater
(including 1.5 qt [1,4 liters] for overflow bottle)
4.0 gal (15 liters)
Overflow Bottle Capacity
3.0 qt (2,8 liters)
Type of Fluid
50/50-mix of ethylene glycol and water
(Refer to Section 2.6.6, “Engine.”)
Transmission:
Capacity w/Filter Change
3.0 gal (11,8 liters)
Filter Capacity
1.5 qt (1,4 liters)
Type of Oil
Universal Tractor Fluid
(Refer to Section 2.6.3, “Transmission.”)
Axle (Differential Housing):
Capacity
Front Axle - 9.5 qt (9,0 liters)
Rear Axle - 10.6 qt (10,0 liters)
Type of Oil
Universal Tractor Fluid. Refer to Section 2.6.1, “Axle
(Differential Housing).”