SkyTrak 8042 Service Manual - Manual (Page 140)

3.79 Model 8042, 10042, 10054 Legacy Rev. 03/04
Boom
19. If you are replacing the secondary intermediate boom
with a new boom section, the following items need to
be removed from the secondary intermediate boom:
a. Remove the capscrews (11) and lockwashers
(12) holding the bottom wear pad (13) and
spacer (14) to the secondary intermediate boom.
Label the wear pad and spacer as Secondary
Intermediate Boom Bottom.” Save the capscrews,
lockwashers, spacer and wear pad inserts (15).
b. Remove the capscrews (16) for the right side wear
pad, the capscrews (17) for the left side wear
pad and lockwashers (18) holding the upper
wear pad (19), shims (20) and spacer (21) to the
secondary intermediate boom. Label the wear
pads, shims and spacers as “Secondary
Intermediate Boom Top Right” and “Secondary
Intermediate Boom Top Left.” Save the
capscrews, lockwashers, spacers, shims and
wear pad inserts (22).
c. Remove the capscrews (23), lockwashers (24) and
flat washers (25) holding the side wear pads (26)
and shims (27) to the secondary intermediate
boom. Label the wear pads and shims as
“Secondary Intermediate Boom Left Side Upper”
and “Secondary Intermediate Boom Right Side
Upper/Lower.” Save the capscrews, lockwashers,
flat washers, shims and wear pad inserts (28).
MH2040
11
12
13
14
15
MH2050
18
16
17
18
19
20
21
22
MH2060
23
24
25
26
27
28