SkyTrak 8042 Service Manual - Manual (Page 385)

Engine: Cummins QSB4.5T
7B.18 Model 8042, 10042, 10054 Legacy Rev. 10/03
8. At the back of the vehicle, connect the transmission
cooler inlet (1) and outlet (2) hoses.
9. Connect the hydraulic oil cooler inlet (3) and outlet
(4) hoses.
10. Install the radiator side clamp (5) on the radiator
input (upper) hose (6) at the radiator (7). Install the
clamp (8) on the radiator return (lower) hose (9) at
the radiator.
11. Install the batteries (10), hold-down bracket (11),
threaded hold-down rods (12) and hold-down nuts
(13).
12. Connect the positive (+) battery cables (14) and
negative (-) battery cables (12) to the batteries (10).
13. Run the engine to operating temperature. Visually
check for leaks with the engine running. Check the
coolant level in the overflow bottle and fill, or drain,
as necessary.
MH4800
1
2
MH4790
3
4
MH4770
5
6
7
8
9
MH4210
10
11 12
13
14
7 14
12
12