SkyTrak 8042 Service Manual - Manual (Page 336)

7A.13 Model 8042, 10042, 10054 Legacy Rev. 10/03
Engine: Cummins 4BT3.9 and 4BTA3.9
10. Loosen clamp (11) on the radiator return (lower)
hose (12). Work the hose off the radiator. Position
the hose out of the way to allow radiator removal, or
remove the hose from the engine. Inspect the hose,
and replace if necessary.
11. Disconnect and cap the transmission inlet (13) and
outlet (14) hoses. Place a suitable container below
the fittings to catch any oil that may drain from the
radiator.
12. Disconnect and cap the inlet (15) and outlet (16)
fittings from the oil cooler (17).
13. At the rear of the oil cooler, remove the six
capscrews (18 and 19), lockwashers and flat
washers. Remove oil cooler.
MH4040
11
12
13
14
MH4030
15
16
17
18
19