B. have the boom fully retracted and horizontal, D. enter the vehicle, E. fasten the seat belt – SkyTrak 8042 Service Manual User Manual
Page 862: F. turn the key to the run position, G. check to be sure the stabil-trak™ light is off, A. start the engine, B. turn the parking brake switch off, C. move the range select lever to (1) first gear, E. drive the vehicle up on the block, A. depress the service brake pedal
B. have the boom fully retracted and horizontal, D. enter the vehicle, E. fasten the seat belt | F. turn the key to the run position, G. check to be sure the stabil-trak™ light is off, A. start the engine, B. turn the parking brake switch off, C. move the range select lever to (1) first gear, E. drive the vehicle up on the block, A. depress the service brake pedal | SkyTrak 8042 Service Manual User Manual | Page 862 / 906 This manual is related to the following products: