Triton Isis - Manual (Page 84)

June 2004 Isis® Sonar User's Manual, Volume 1 70
• Convert Lat/Long to UTM
(check box) — If a special navigation
option is included and enabled with this Isis system, Isis will convert
Latitude and Longitude, as acquired over a serial port, to Universal
Transverse Mercator (UTM) coordinates. This conversion option
should be used as a last resort. Conversion to UTM is always best
done by an integrated navigation system. See the explanation for
Setup UTM button, next.
• Setup UTM
(button) — If Convert Lat/Long to UTM is checked
(enabled), this button becomes available. Clicking the button
displays a dialog box where you can configure for UTM or RD. A
sample appears in Figure 4-7.
Chapter4: Setting Up Isis to Record Data