Triton Isis User Manual
Page 76
June 2004 Isis® Sonar User's Manual, Volume 1
62
Figure 4-2. Select Digital I/O Card choice dialog
After you choose a sonar type (and, potentially, a type of digital I/O card),
the Isis software displays the Sidescan Sonar Information dialog box
(Figure 4-3).
Figure 4-3. Sonar Information dialog box for side-scan or subbottom
profilers
In the top left area of the Sonar Information dialog box, you can select a
channel to be added, edited, or deleted. Unnamed channels are designated
box only if you chose AU32 Delph Analog from the Select Sonar dialog box
(Figure 4-1). You can also assign specific values for Frequency, Horiz.
Beam Angle, Beam Width, Tilt down angle, and/or Name of Server in the
Chapter4: Setting Up Isis to Record Data