Triton Isis - Manual (Page 67)

June 2004 Isis® Sonar User's Manual, Volume1 53
3.7.4 Time
Use the Go to Time option to go to the specified point either in the current
file or all files. The default is to Search all files.
Figure 3-15. Go to Time dialog box
You specify a time according to standard hour, minute, and second time
format. The keyboard shortcut is ALT+T to get this dialog box.
If the specified time is earlier or later than the first or last time in the file, you
will get an error message indicating that your choice of time is out of range.
(“Time is before or past the start of the current file.”)
Typing a time such as 07 will cause the system to search for time 07:00:00.
In other words, Isis appends as many zeroes as needed.
If you have RAMP support, you will also see an option in the Go to Time
dialog box to Load from time server.
If you put a check mark in the box labeled Pause at this time, you can then
type in a time that will act as a trigger to have Isis pause its playback when
that time is reached.
3.7.5 Location
Isis can begin displaying imagery at a ping that is closest to a location that
you specify with the Go to Location command. (This command can also be
Chapter 3: Using the File Menu