6 microwire transmit data size (mwds), 7 transmit fifo interrupt/dma threshold (tft) – Intel PXA26X User Manual
Page 332

8-14
Intel® PXA26x Processor Family Developer’s Manual
Synchronous Serial Port Controller
8.7.2.6
Microwire Transmit Data Size (MWDS)
Use the Microwire transmit data size (MWDS) bit to select the 8- or 16-bit size for command word
transmissions in the National Microwire frame format. When MWDS=0, 8-bit command words are
transmitted. When MWDS=1, 16-bit command words are transmitted. The MWDS setting is
ignored for all other frame formats.
8.7.2.7
Transmit FIFO Interrupt/DMA Threshold (TFT)
This 4-bit value sets the level at or below which the FIFO controller triggers a DMA service
request and, if enabled, an interrupt request. Refer to
for suggested TFT values associated
with DMA servicing.
Figure 8-4. Motorola
SPI* Frame Formats for SPO and SPH Programming
SSPSCLK
SPO=0
...
SSPSCLK
SPO=1
...
SSPSFRM
...
SSPTXD
Bit
Bit > ... Bit<1> Bit<0> SSPRXD Bit Bit 1> ... Bit<1> Bit<0> MSB 4 to 16 Bits LSB SPH = 0 SSPSCLK SPO=0 ... SSPSCLK SPO=1 ... SSPSFRM ... SSPTXD Bit Bit 1> ... Bit<1> Bit<0> SSPRXD Bit Bit 1> ... Bit<1> Bit<0> MSB 4 to 16 Bits LSB SPH = 1