Grass Valley iControl V.6.02 - Manual (Page 77)

iControl
User Guide
67
b) Type the IP address of the highest-priority NTP server in the NTP server 0 IP address
box, and then click Apply.
c) If there are alternate NTP servers available to act as NTP timing backup to the highest
priority NTP server, type their IP addresses into the remaining fields in order of priority
(lowest number is highest priority).
Note: The highest-priority NTP server is the NTP server you would like to be
considered as the preferred timing source. All other NTP timing sources
(i.e. NTP server 1, NTP server 2) are to be considered as the next-in-line preferred
timing source in order of ascending server number and upon the Application Server’s
inability to resolve the highest priority source.