Grass Valley iControl V.6.02 - Manual (Page 357)

iControl
User Guide
347
2. If you would like to acknowledge an alarm from a channel’s Web page, perform the
following steps:
a) Open the iC Web page (see page 580 ).
b) In the channel’s Web page, right-click the alarm, and then click Acknowledge.
Resetting Latches
To reset a latch from the GSM Alarm Browser
1. Open the GSM Alarm Browser (see page 577 ).
2. Right-click the alarm and then click Reset client latch or Reset server latch, as required.
To reset a latch from a channel’s Web page
1. Open the required iC Web page (see page 577 ).
2. Right-click the individual alarm and then click Reset client latch or Reset server latch, as
required.
Note: Once the affected individual channel is acknowledged the button changes
from flashing red to solid red.