Applying salvos router crosspoint settings – Grass Valley iControl V.6.02 User Manual
Page 514
Backup and Redundancy
Applying Salvos Router Crosspoint Settings
504
To create salvos crosspoint settings for a particular router
1. On the iControl—Startup page, click iC Router Control.
The Router Manager page appears.
2. Click the Router Manager link - in this example, RouterManager.
The Router Manager Configurator window appears.
3. Select the folder of the router that you would like to see, and then select Open.
The router folder opens.
4. Select the router that requires the crosspoint changes, and then select the Salvos tab from
the right pane.
5. Select the pairs (row #, column#) as preferred as pre-settings for the router.
6. Click New.
7. Type a name for the new crosspoint settings, and then click OK.
8. Click Save.
Applying Salvos Router Crosspoint Settings
To apply salvos router crosspoint settings
1. On the iControl—Startup page, click iC Router Control.
The Router Manager page appears.
2. In the row corresponding to the router requiring crosspoint changes, click Matrix.
A Matrix View window appears.
REQUIREMENT
Before beginning this procedure, make sure you have opened iControl for the Application
Server running the router service (see
).
Note: The following procedure includes steps that use the iControl Router
Manager. For details about iControl Router Manager configuration, see the iControl
Router Manager Quick Start Guide.
REQUIREMENT
Before beginning this procedure, make sure you have opened iControl for the Application
Server running the router service (see
).