Grass Valley iControl V.6.02 - Manual (Page 372)

Alarms in iControl
Inverting Alarms Manually
362
Inverting Alarms Manually
To manually invert alarms in iC Web or iC Navigator
1. Open the GSM Alarm Browser (see page 577 ).
2. If you would like to perform the inversion action in iC Navigator’s Incident Log Viewer,
open Incident Log Viewer (see page 569 ).
IMPORTANT: If your network is configured to report alarms to multiple GSMs, it is
recommended that you configure the same Grace period duration for manual
inversions among all GSMs. Similarly, it is recommended that you configure the
same Grace period duration for scheduled inversions among all GSMs.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• If you are working in iC Web, make sure you have opened the appropriate iControl Web
page (see page 581 ).
• If you are working in iC Navigator, make sure you have opened iC Navigator
(see page 566 ).