Grass Valley iControl V.6.02 - Manual (Page 246)

Configuring Devices & Services
Copying Densité Card Profiles
236
OR,
• If you are importing, on the Import tab, click Local file.
The Open window appears.
2. In the Open window, browse to the local directory where the desired profile file is located
or where you wish to create a profile file.
3. To change the view format of the displayed files, use the Display format buttons, or
perform the following steps:
a) Right-click anywhere in the File display field.
b) Point to View, and then click either List or Display, as required.
The view format changes to the selected mode.
Copying Densité Card Profiles
When a card, such as a video or audio probe, is added to a Densité-series frame, it must be
configured for monitoring and control. The configuration settings are referred to as a card
profile. In iControl, a card profile can be copied from one card to another of the same type and
firmware version.
Note: Use the Navigation buttons to help you browse.
File browser
File display field
Navigation buttons
Display format buttons