Grass Valley iControl V.6.02 - Manual (Page 231)

iControl
User Guide
221
Creating a Composite Panel
Composite Panels are a new type of virtual service for controlling two or more cards with a
single GUI. While intended primarily for Densité series cards, some older Imaging series cards
are also supported.
Composite Panels can contain certain dashboard elements (e.g. input signal, reference), global
audio and video alarms (if supported by the card), video processing elements, audio
processing elements, and user presets. You can create up to 50 Composite Panels per
Application Server
There are three steps involved in creating a Composite Panel: component selection,
configuration, and initialization.
To create a Composite Panel
1. On the iControl—Services management page, make sure the Virtual Service Manager is
active (green).
2. Open iC Navigator (see page 566 ).
3. Click the Logical view tab. Make sure that the Virtual Service Manager is visible.
4. Double-click the Virtual Service Manager row.
REQUIREMENT
Before beginning this procedure, make sure you have opened the iControl—Services
management page (see
page 552 ).
Virtual
Service
Manager
active