Grass Valley iControl V.6.02 - Manual (Page 356)

Alarms in iControl
Acknowledging an Individual Alarm
346
To enable the display of alarm acknowledgement for a particular GSM Alarm
Browser
• In the GSM Alarm Browser, select Show status details.
Acknowledging an Individual Alarm
To acknowledge an individual alarm
1. If you would like to acknowledge an alarm with the GSM Alarm Browser, perform the
following steps:
a) Open the GSM Alarm Browser for the appropriate GSM (see page 577 ).
b) Right-click the alarm and click Acknowledge.
Note: Alarm acknowledgements are displayed immediately.
REQUIREMENT
Before beginning this procedure, make sure you have opened iC Navigator (see page 566 ).