Determining the oid for polling a specific status, Example – Grass Valley iControl V.6.02 User Manual
Page 431
iControl
User Guide
421
STATUS mandatory
DESCRIPTION "Device Type"
::= { statusEntry 4 }
name OBJECT-TYPE
SYNTAX OCTET STRING
ACCESS read-only
STATUS mandatory
DESCRIPTION "Current Alarm Logical Name"
::= { statusEntry 5 }
status OBJECT-TYPE
SYNTAX GsmStatus
ACCESS read-only
STATUS mandatory
DESCRIPTION "Current Alarm Status"
::= { statusEntry 6 }
Determining the OID for polling a specific status
To obtain the current state for a specific status, a SNMP-GET can be performed using the
following OID:
.iso.org.dod.internet.private.enterprises.miranda.gsm.statusTable.statusEntry.
status.deviceIndex.slotIndex.trapIndex
This will return the variable binding of the status for the alarm type defined by the trapIndex
number, for the card in the slot number matching the slotIndex of the frame identified by the
deviceIndex number.
Example
Here’s an example of the status table MIB object for a Grass Valley Densité SCP-1121 SDI probe
card.