Icontrol as an snmp manager, Enabling icontrol to manage an snmp device – Grass Valley iControl V.6.02 User Manual
Page 396
iControl and SNMP
iControl as an SNMP Manager
386
iControl as an SNMP Manager
Enabling iControl to Manage an SNMP Device
To enable iControl to manage an SNMP device
1. In iC Navigator, double-click on a GSM to open its Alarm Browser window.
To do this...
...do this...
List all existing user profiles.
Type the following in your PuTTY secure shell:
./usersnmpv3 list
Test a user profile.
Type the following in your PuTTY secure shell:
./usersnmpv3 test
Note: The SNMP agent on the device must be enabled. Please consult the
documentation that came with the device for instructions.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• There is an active connection between the iControl Application Server and the SNMP
device.
• You have opened iC Navigator (see
).