Grass Valley iControl V.6.02 - Manual (Page 469)

iControl
User Guide
459
Changing a Source’s Channel Assignments
To change a source’s channel assignments
1. On the Configuration tab, in the Fingerprint comparison setup area, expand the
comparison group folder representing the group whose source’s channels you would like
to configure.
2. In the Audio 1 channel list of the source whose configuration you are changing, select the
desired channel.
3. Perform step 2 for all visible Audio channel list for this source (e.g. Audio 2 list and Audio 3
list).
4. Click Apply all to save all changes to the comparison group.
The asterisk next to the comparison group disappears.
Miscellaneous Fingerprint Comparison Configuration Tasks
Editing a Comparison Group’s Properties
Edit a comparison group’s properties when you would like to change any of the following
settings of an existing comparison group:
• Name (of the comparison group)
• Number of audio channels
• Audio-lead alarm threshold (time in milliseconds)
• Audio-lag alarm threshold (time in milliseconds)
To edit a comparison group’s properties
1. On the Configuration tab, in the Fingerprint comparison setup area, right-click the
comparison group whose properties you would like to edit, and then click Edit properties.
The Comparison group properties window appears.
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see page 579 ).
• There are currently no comparisons underway for the comparison group you would like
to edit.
• [RECOMMENDED]: You are performing this procedure as a task within the context of an
approved workflow (see "Sample Workflows" , on page 451).
REQUIREMENTS
Make sure you meet the following conditions before beginning this procedure:
• You have opened Audio Video Fingerprint Analyzer (see page 579 ).
• There are currently no comparisons underway for the comparison group you would like
to edit.