Grass Valley iControl V.6.02 - Manual (Page 437)

iControl
User Guide
427
To enable the GSM AppServer Health Monitoring plug-in
1. In the GSM Alarm Browser, in the list under Create new alarm provider, select AppServer
Health Monitoring, and then click New.
2. In the Host field of the SNMP plug-in configuration window, type the IP address of the
Application Server whose health you wish to monitor, and then click OK.
3. In the Alarm Browser window, health monitoring alarms will appear in a folder whose
name corresponds to the IP address of the Application Server.
REQUIREMENT
Before beginning this procedure, make sure you have opened the GSM Alarm Browser
(see
"Opening the GSM Alarm Browser" , on page 577).