Appendix c cableshark specifications, General features, Vf auto-test – EXFO CableSHARK P3 VF/DSL Cable Qualifier User Manual
Page 271
CableSHARK P3 User Guide
259
Appendix C CableSHARK Specifications
General Features
Dimensions:
Approx. 6.9” x 9.25” x 2.6” (175 x 235 x 65 mm)
Weight:
Approx. 4.8 lbs (2.2 kg) (including power adapter).
Operating
temperature:
Monochrome VGA : 32
o
to 120
o
F (0
o
to +50
o
C).
Colour VGA (optional) : 32
o
to 110
o
F (0
o
to +43
o
C).
Storage temperature:
14
o
to 140
o
F (-10 to +60
o
C).
Humidity:
Up to 95% relative, non-condensing.
Power supply:
16-18VDC input via external AC Mains adapter (95 - 250 volts, 43 - 63 Hz,
2.5 A).
Battery:
Internal Rechargeable Nickel Metal Hydride (NiMH) battery, with battery state
indication.
Display:
640 x 480 pixels. 6.9” x 4.7” (175 mm x 120 mm) with backlight.
Test
connections:
Main TX/RX - 3 pin CF (Siemens), RJ-45, RJ-11.
Auxiliary RX - 3 Pin CF (Siemens). Also used for RFL.
Differential voltage protection 125 V
RMS
or 400 VDC max.
Common mode voltage protection 1000 V
RMS.
Serial port:
RS232 9-pin D-type with flow Control (XON/XOFF, or none).
For upgrading software / downloading results / remote control.
USB port:
Series A receptacle. Host USB port for upgrading software / saving results.
Ethernet port:
10BaseT port for upgrading software / downloading results / remote control.
Self-test:
Routine on power-up.
Voltage detection:
>20V will trigger alarm message.
Result storage:
Up to 128 in non-volatile internal memory, 1000 for each 16 MB of optional
USB memory.
Languages:
Up to 8 user selectable languages.
Phone Book:
Stores up to 20 records
Dial/Loop Holding:
Approximately 30 mA (Tx or Rx), supports DTMF and Pulse Dialing
VF Auto-Test
(Expert system automatic test)
¾
Automatic test providing pass / fail results in both text and graphic formats
¾
DMM-12 Auto-test (Voltage, Resistance, Capacitance & Capacitive Imbalance), Load Coil Test,
TDR, VF Balance, VF Noise, Power Influence.