EXFO CableSHARK P3 VF/DSL Cable Qualifier - Manual (Page 200)

VF / DSL Cable Qualifier
188
SHOW REF Pressing the function button corresponding to SHOW REF allows a user to
overlay a REFERENCE MASK over the test result on screen to compare the
two. See Section 5.4 for more information about the REFERENCE MASK
feature.
Pressing the SAVE / UPLOAD button shows a pop-up window where the user is allowed to upload results,
and save results to internal memory or to external USB memory.
UPLOAD RESULT Choosing UPLOAD RESULT from the SAVE / UPLOAD pop-up menu sends
the result that appears on the CableSHARK screen (current test or recalled
test) to a PC via a NULL modem cable. The remote control program Visi-
SHARK can be used to capture and analyze the results on a PC.
SAVE TO MEM Choosing SAVE TO MEM from the SAVE / UPLOAD pop-up menu invokes
the SAVE SESSION menu. From here, the test results can be saved to
internal non-volatile memory. See Section 5.3 for more information.
SAVE TO USB Choosing SAVE TO USB from the SAVE / UPLOAD pop-up menu invokes
the SAVE SESSION menu. From here, the test results can be saved to
external USB memory. See Section 5.3 for more information.
The remainder of the buttons are as follows:
ZOOM IN HORIZ /
ZOOM OUT HORIZ Use these function buttons to zoom IN and OUT based on the horizontal
graph scale. Please note after the completion of a test, the ZOOM OUT
HORIZ option will be disable as it is impossible to ZOOM OUT. Press the
ZOOM IN HORIZ button once or multiple times and the ZOOM OUT HORIZ
button will appear. Likewise, when the maximum zoom level is achieved, the
ZOOM IN HORIZ button will disappear.
TEST SETUP Pressing the function button associated with TEST SETUP activates the
SHDSL Test Setup menu. Test parameters can be modified and the test can
be run once again from this screen.
MAIN MENU Select MAIN MENU to return to the Main Menu.