Allied Telesis AT-S62 - Manual (Page 84)

Chapter 6: MAC Address Table
84 Section I: Basic Operations
Displaying the MAC Address Table
To view the MAC address table, perform the following procedure:
1. From the Home page, select either Configuration or Monitoring.
2. Select the Layer 2 menu option.
3. Select the MAC Address tab.
Figure 19 on page 85 shows how the tab appears when displayed
through the Configuration page. If displayed through the Monitoring
page, the Add buttons and the Delete section at the bottom of the
window are not included. The buttons are used to add static and
multicast address to the switch as explained in “Adding Static Unicast
and Multicast MAC Addresses” on page 87. The Delete section is used
to delete all dynamic MAC addresses, as explained in “Deleting All
Dynamic Unicast and Multicast MAC Addresses” on page 90.