Allied Telesis AT-S62 - Manual (Page 258)

Chapter 19: SNMPv3
258 Section III: SNMPv3
7. In the Security Name field, enter a name of an SNMPv1 and SNMPv2c
user.
This name must be unique. Enter a value of up to 32 alphanumeric
characters.
Note
Do not use a value configured with the User Name parameter in the
SNMPv3 User Table.
8. In the Transport Tag field, enter a name of up to 32 alphanumeric
characters.
The Transport Tag parameter links an SNMPv3 Community Table
entry with an SNMPv3 Target Address Table entry. Add the value you
configure for the Transport Tag parameter to the Tag List parameter in
the Target Address Table as desired. See “Creating a Target Address
Table Entry” on page 239.
9. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the SNMPv3 Community Table to the configuration file. After making
changes to an SNMPv3 Community Table entry with a Volatile storage
type, the Save Config menu selection does appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
SNMPv3 Community Table to the configuration file. After making
changes to an SNMPv3 Community Table entry with a NonVolatile
storage type, Save Config menu selection appears, allowing you to
save your changes.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 Community Table entry
takes effect immediately.
10. Click Apply to update the SNMPv3 Community Table.
11. To save your changes, select the Save Config menu selection.