Allied Telesis AT-S62 - Manual (Page 168)

Chapter 14: Quality of Service
168 Section II: Advanced Operations
4. Select the traffic class you want to delete and click Delete.
The traffic class is deleted from the switch.
Displaying the
Traffic Classes
To display the traffic classes, perform the following procedure:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select Services.
3. Select the Traffic Class tab.
The Traffic Class tab displays the currently configured flow groups in a
table that contains the following columns of information:
The columns in the tab are defined here:
ID
The ID of the traffic class.
Description
A description of the traffic class.
Active
Whether or not this traffic class is active on the switch. An active traffic
class is part of a policy that is assigned to one or more switch ports. An
inactive traffic class is not assigned to any policies or to policies that
are not assigned to switch ports.
Parent Policy ID
The QoS policies to which the traffic class is assigned.
Flow Group List
The flow groups assigned to this traffic class.
4. To display detailed information about a traffic class, select the traffic
class and click View.
For definitions of the parameters, refer to “Creating a Traffic Class” on
page 162.
5. Click Close.