Allied Telesis AT-S62 - Manual (Page 225)

AT-S62 Management Software Web Browser Interface User’s Guide
Section III: SNMPv3 225
the Access Table to the configuration file. After making changes to an
Access Table entry with a Volatile storage type, the Save Config menu
selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
Access Table to the configuration file. After making changes to an
Access Table entry with a NonVolatile storage type, the Save Config
menu selection appears.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 Access Table entry will take
effect immediately.
13. Click Apply to update the SNMPv3 Access Table.
14. To save your changes, select the Save Config menu selection.