Allied Telesis AT-S62 - Manual (Page 18)

Preface
18
New Features History
The following subsection contains the new features in the AT-S62
management software.
Version 1.4.0
Table 1 lists the new features in version 1.4.0 of the AT-S62 management
software.
Table 1. New Features in AT-S62 Version 1.4.0
Change Chapter and Procedure
Fan Control Feature for the AT-8524POE Switch
New feature. The fan control feature is not supported from the web
browser interface. Use the menus or the command line
interface to configure the feature.
Quality of Service - Flow Groups and Traffic Classes
Added the following new parameters to
flow groups and traffic classes:
ˆ TOS parameter for replacing the
Type of Service (ToS) field of IPv4
packets.
ˆ MOVETOSTOPRIORITY
parameter for replacing the value in
the 802.1p priority field with the
value in the ToS priority field in
IPv4 packets.
ˆ MOVEPRIORITYTOTOS
parameter for replacing the value in
the ToS priority field with the
802.1p priority field in IPv4 packets.
The new parameters are not supported in the web
browser interface. Use the menus or the command line
interface to create a flow group or traffic class with the
new parameters.
Quality of Service - Policies
Added the following new parameters to
QoS policies:
ˆ TOS, MOVETOSTOPRIORITY and
MOVEPRIORITYTOTOS, as
defined above.
ˆ SENDTOMIRROR parameter for
copying traffic to a destination
mirror port. (This parameter applies
only to QoS policies.)
The new parameters are not supported in the web
browser interface. Use the menus or the command line
interface to create a policy with the new parameters.