Allied Telesis AT-S62 - Manual (Page 220)

Chapter 19: SNMPv3
220 Section III: SNMPv3
7. In the View Type field, enter one of the following view types:
Included
Enter this value to permit the View Name to see the subtree specified
above.
Excluded
Enter this value to not permit the View Name to see the subtree
specified above.
8. In the Storage Type field, enter a storage type for this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the Target Parameters Table to the configuration file. After making
changes to an Target Parameters Table entry with a Volatile storage
type, the Save Config menu selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
View Table to the configuration file. After making changes to a View
Table entry with a NonVolatile storage type, the Save Config menu
selection appears.
Note
The Row Status parameter is a read-only field in the web interface.
The Active value indicates the SNMPv3 View Table entry takes
effect immediately.
9. Click Apply to update the SNMPv3 View Table.
10. To save your changes, select the Save Config menu selection.