Allied Telesis AT-S62 - Manual (Page 28)

Chapter 1: Starting a Web Browser Management Session
28 Section I: Basic Operations
Saving Your Parameter Changes
When you make a change to a switch parameter, the change is, in most
cases, immediately activated as soon as you click the Apply button.
However, a change to a switch parameter is initially saved only to
temporary memory. It is lost the next time you reset or power cycle the
unit. To permanently save a change, you must click the Save Config
button in the Configuration menu, shown in Figure 4. This updates the
switch’s active configuration file. A change saved to the active
configuration file is retained even when the unit is powered off or reset.
This menu option is displayed only after you have made a configuration
change. After you click Save Config, your changes are added to the
active configuration file and the option is removed from the menu.
Figure 4. Save Config Button
Save Config
Button