Allied Telesis AT-S62 - Manual (Page 238)

Chapter 19: SNMPv3
238 Section III: SNMPv3
8. In the Storage Type field, select one of the following storage types for
this table entry:
Volatile
Select this storage type if you do not want the ability to save an entry in
the Notify Table to the configuration file. After making changes to an
Notify Table entry with a Volatile storage type, the Save Config menu
selection does not appear.
NonVolatile
Select this storage type if you want the ability to save an entry in the
Notify Table to the configuration file. After making changes to an Notify
Table entry with a NonVolatile storage type, the Save Config menu
selection appears.
Note
The Row Status parameter is a read-only field in the Web interface.
The Active value indicates the SNMPv3 Notify Table entry takes
effect immediately.
9. Click Apply to update the SNMPv3 Notify Table.
10. To save your changes, select the Save Config menu selection.