Allied Telesis AT-S62 - Manual (Page 100)

Chapter 7: Static Port Trunks
100 Section I: Basic Operations
Displaying the Static Port Trunks
To display the static port trunks on the switch, do the following:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 menu option.
3. Select the Port Trunking tab.
The Port Trunking tab displays the following information:
ID
The ID number of the trunk.
Name
The name of the trunk.
Type
The load distribution method:
ˆ SA - Source MAC address (Layer 2)
ˆ DA - Destination MAC address (Layer 2)
ˆ SA/DA - Source/destination MAC address (Layer 2)
ˆ SI - Source IP address (Layer 3)
ˆ DI - Destination IP address (Layer 3)
ˆ SI/DI - Source/destination IP address (Layer 3)
Ports
The ports of the trunk.