Allied Telesis AT-S62 - Manual (Page 262)

Chapter 19: SNMPv3
262 Section III: SNMPv3
Displaying Access
Table Entries
To display entries in the SNMPv3 Access Table, perform the following
procedure.
1. From the Home Page, select Monitoring.
2. Select the Mgmt Protocols menu selection.
3. Select the SNMP Tab.
4. From the SNMP Monitoring Tab, click the circle next to View Access
Table.
5. Click View at the bottom of the page.
The Monitoring, SNMPv3 Access Table Page is shown in Figure 85.
Figure 85. Monitoring, SNMPv3 Access Table Page