Allied Telesis AT-S62 - Manual (Page 318)

Chapter 23: Protected Ports VLANs
318 Section V: Virtual LANs
Deleting a Protected Ports VLAN
To delete a protected ports VLAN from the switch, perform the following
procedure:
1. From the Home Page, select Configuration.
2. Select the Layer 2 menu selection.
3. Select the VLAN tab.
4. Click the button next to the name of the protected ports VLAN you
want to delete. You cannot delete the Default_VLAN.
5. Click Remove.
A confirmation prompt is displayed.
6. Click OK to delete the VLAN or Cancel to cancel the procedure.
If you click OK, the VLAN is deleted from the switch. All ports in the
VLAN are returned to the Default_VLAN as untagged ports.
7. To permanently save the change, select the Save Config menu
selection.