Allied Telesis AT-S62 - Manual (Page 50)

Chapter 2: Basic Switch Parameters
50 Section I: Basic Operations
To return the AT-S62 management software to the default settings,
perform the following procedure:
1. From the Home Page, select Configuration.
2. Select Utilities menu option.
3. Select the System Utilities tab.
The System Utilities tab is shown in Figure 8.
Figure 8. System Utilities Tab
Note
The bottom portion of the System Utilities tab is used to download
and upload files from the switch. For instructions, refer to Chapter
10, “File Downloads and Uploads” on page 115.
4. Click the Reboot Switch After Resetting to Defaults checkbox.
5. Click Apply.
A confirmation prompt is displayed.
6. Click OK to return the switch settings to the default values.