Allied Telesis AT-S62 - Manual (Page 51)

AT-S62 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 51
The switch resets and returns all values to the default settings. After
the reset is complete, you must reestablish your management session
if you want to continue managing the unit.
7. As mentioned at the start of this procedure, returning a switch to is
default settings does not alter the contents of the active boot
configuration file. To return the file to the default settings, you must
select Save Config to save the current switch settings after you
reestablish your management session. Otherwise, the switch returns
to its previous parameter settings the next time you reset or power
cycle the unit.