Allied Telesis AT-S62 - Manual (Page 198)

Chapter 18: Power Over Ethernet
198 Section II: Advanced Operations
Configuring PoE Port Settings
This procedure enables and disables PoE on a port. This procedure also
sets a port’s priority level and its maximum power usage.
The default setting for PoE on a port is enabled. You do not have to
disable PoE on ports connected to non-powered devices (that is, devices
that receive their power from another power source). A port connected to a
network node that is not a powered device functions as a regular Ethernet
port, without PoE. The PoE feature remains activated on the port but no
power is delivered to the device.
To configure PoE port settings, do the following:
1. From the Home Page, select Configuration.
2. Select the System menu option.
3. Select the Power Over Ethernet tab.
Note
The Power Over Ethernet tab only appears for AT-8524POE
switches.
4. In the graphic image of the switch, click the port you want to configure.
A selected port turns white. You can configure more than one port at a
time.
5. Click Modify.