Allied Telesis AT-S62 - Manual (Page 106)

Chapter 8: Port Mirroring
106 Section I: Basic Operations
Deleting a Port Mirror
To delete a port mirror so that you can use the destination port for normal
network operations, do the following:
1. Perform Steps 1 to 3 in “Creating a Port Mirror” on page 102 to display
the Port Mirroring tab.
2. Disable the port mirror using the Enable Mirror option.
3. Click the destination port to change it from white to black. Once black,
the port is available for normal network operations.
4. Click Apply.
The change is immediately implemented on the switch.
5. To permanently save the change, click the Save Config menu option.