Allied Telesis AT-S62 - Manual (Page 107)

AT-S62 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 107
Displaying the Port Mirror
To display the port mirror, do the following:
1. From the Home page, select Monitoring.
2. From the Monitoring menu, select the Layer 1 option.
3. Select the Port Mirroring tab.
The information in the tab is described below:
Mirror to Port
The destination port where the traffic is copied to and where the
network analyzer is located.
Ingress Port(s)
The source ports whose ingress traffic is mirrored to the destination
port.
Egress Port(s)
The source ports whose egress traffic is mirrored to the destination
port.
Status
The status of the mirroring feature. If enabled, traffic is being copied to
the destination port. If disabled, no traffic is being mirrored.