Allied Telesis AT-S62 - Manual (Page 67)

AT-S62 Management Software Web Browser Interface User’s Guide
Section I: Basic Operations 67
Modifying an SNMPv1 or SNMPv2c Community String
To modify a community string, perform the following procedure:
1. From the Home page, select Configuration.
2. Select the Mgmt. Protocols menu option.
3. Select the SNMP tab.
The SNMP tab is shown in Figure 11 on page 62.
4. Click Configure in the SNMPv1/v2c section of the tab
The SNMP tab for SNMPv1 and SNMPv2c is shown in Figure 12 on
page 64.
5. Click the button next to the community string you want to modify.
6. Click Modify.
The Modify SNMP Community page is shown in Figure 14.
Figure 14. Modify SNMPv1/v2c Community Page